Box Super Stock Rules

The intention here is to have a fun class that is all stock components and for fun.

This is box stock rigs with C channel chassis.  If you want to run Fusion, Pro, or Comp fox, that would fall in Pro Stock Rules.  You are encouraged to make a list of what kits or RTR your parts came from to display at sign up.

Electronics:

ESC and Motor - Brushed Motors only. You can upgrade or replace the stock one as long as it's still brushed.

Servo - You may use any servo you wish.  No limits for steering servo.

Battery - 3s max battery

No winches will be used.

Chassis:

Must be a C channel chassis that was in a commercial RTR or commercial Kit.
Must use the factory skid for that chassis.
No aftermarket Chassis allowed.

Body:

Maybe an aftermarket body as long as it is full width and full length.
Must be a full length body (no chassis rails exposed).  If you are running a truck that didn't have a full body such as a Ascent Fusion, than you must add a flat bed or bed piece to cover the rear rails.
Mild body trimming only.  No more that 1/4 inch past factory cut lines.

Driveline:

Axles and transmission must be from a commercial RTR or Kit and you must specify which they are from.
Drive Shafts maybe after Market.
Gears maybe replaced with aftermarket as long as they are same spec as stock.
No dig is allowed to be used during competition even if the truck came equipped with it.

Tires:

Must be a tire from a RTR or Kit.  No aftermarket tires. You must tell us which kit or RTR the tires are from.

Wheels:

Any 1.9 wheel maybe use.  No 2.2 allowed.

Bumpers:

Must have a front bumper from any RTR or Kit.  No aftermarket allowed.

Sliders:

Not required, but if installed they must be from a kit or rtr.

Links:

Aftermarket Links are allowed to replace stock ones.