1.9 Mod Rules

The intention here is to have a fun class is modded stock trucks.

This class allows flat rail chassis such as VRD, Comp Fox, Axial Pro, and Redcat Fusion as well as after market build.
You are encouraged to make a list of what kits or RTR your parts came from to display at sign up.

Electronics:

ESC and Motor - Brushed or brushless motors allowed.  Must be can style motor and not revolver style.

Servo - You may use any servo you wish.  No limits for steering servo.

Battery - 3s max battery

No winches will be used.

Chassis:

Flat rail chassis are allow. 
12 degrees or less angle on the skid.
Flat skids allowed.
Mid mount trans style skids.

Body:

Maybe an aftermarket body as long as it is full width and full length.
Must be a full length body (no chassis rails exposed).  If you are running a truck that didn't have a full body such as a Ascent Fusion, than you must add a flat bed or bed piece to cover the rear rails.
Mild body trimming only.  No more that 1/4 inch past factory cut lines.

Driveline:

Axles and transmission must be from a commercial RTR or Kit and you must specify which they are from.
Drive Shafts maybe after Market.
Gears maybe replaced with aftermarket as long as they are same spec as stock.
No dig is allowed to be used during competition even if the truck came equipped with it.

Tires:

Any height 1.9 tire allowed. 
No pin tires.
No Cut N Shut
Lug trimming allowed.

Wheels:

Any wheel maybe used as long as the tire is a 1.9 tires.

Bumpers:

Must have a front bumper.
After Market is allowed.

Sliders:

Not required, but after market is allowed.

Links:

Aftermarket Links are allowed to replace stock ones.
Wheel base to stay under 12.6"